Contact Us

Use the form on the right to contact us.

Or call us at: 510-845-5055.

Phone *
Phone

937 Grayson Street
Berkeley, CA 94710
USA

Peghead Planetary Nickel & Ivoroid 8mm Tuners

STORE

Peghead Planetary Nickel & Ivoroid 8mm Tuners

Peghead 85mm Nickel & Ivoroid 01_cleaned_white.png
Peghead 9mm Nickel & Ivoroid 01 .jpg
Peghead 9mm Nickel & Ivoroid 02.jpg
Peghead 8mm Nickel & Ivoroid 02_web.png
Peghead 85mm Nickel & Ivoroid 01_cleaned_white.png
Peghead 9mm Nickel & Ivoroid 01 .jpg
Peghead 9mm Nickel & Ivoroid 02.jpg
Peghead 8mm Nickel & Ivoroid 02_web.png

Peghead Planetary Nickel & Ivoroid 8mm Tuners

79.00

Peghed #844 Nickel

FREE SHIPPING! 
(Shipping is FREE for all domestic orders of tuners, strings and electronics in the contiguous U.S.   For international shipping, or shipping to Alaska or Hawaii, or large bulk orders, please email us directly to make special arrangements, or we'll simply contact you after check-out.)

These cleverly designed Peghed brand  tuners have an internal set of planetary gears with a 4:1 turning ratio.  These are a bit heavier than the black Pegheads and weigh about an ounce and a half for the set. They look like traditional ukulele friction tuners that don’t work that well but these internally geared tuners work fabulously. They are designed and made in the United States. For installation instructions see the TECH TIPS section of my website. Some special tools are required for installation. A set of tuners consists of 2 left hand thread and 2 right hand thread pegs. The bodies of the tuners are nickel plated steel and the buttons are made of ivoroid colored plastic. Your peg holes need to be less than 8.0mm for these pegs to be retrofitted to an existing instrument.

These pegs are ideally suited for Tenor and Baritone Ukuleles and for Banjos.

Quantity:
Add To Cart